BoltFitFinder

The Easton 6.5mm Hunter Classic in a 300 spine: 9.5 grains per inch,.246 in bore, the 6.5mm Microlite nock (8 gr) it takes and the 8-32 thread. Suits a heavy draw of roughly 65 lb and up. Sourced.

Updated 05 September 2026.

Archery arrow models ยท specification

Easton 6.5mm Hunter Classic in a 300 spine: GPI, bore and nock

The 300 spine of the Easton 6.5mm Hunter Classic: its exact GPI, the nock and thread it takes, and the draw it suits.

The Easton 6.5mm Hunter Classic in a 300 spine weighs 9.5 grains per inch and suits a heavy draw of roughly 65 lb and up. It takes the 6.5mm Microlite nock (8 gr) its.246 in bore requires and the 8-32 point thread; confirm on the maker chart for your exact draw and length.
This spinemanufacturer data, cited
ModelEaston 6.5mm Hunter Classic
BrandEaston
Spine300
Outside diameter.300 in OD
Weight9.5 GPI
Grains per inch9.5 GPI
Inside diameter.246 in
Stock nock6.5mm Microlite nock (8 gr)
Stock insert6.5mm Hunter Classic insert (23 gr, 5/16 field points)
Point thread8-32
Straightness+/-.003 in
Suitsa heavy draw of roughly 65 lb and up
The shaft

Easton 6.5mm Hunter Classic carbon arrow shaft (300 spine)

Shop Easton 6.5mm Hunter Classic carbon arrow shaft (300 spine) on AmazonaffiliateFind Easton 6.5mm Hunter Classic carbon arrow shaft (300 spine) on eBayaffiliate

Field notes

This is the 300 spine of the Easton 6.5mm Hunter Classic, a 6.5mm class (.246 in ID) shaft with a.246 in inside diameter. In this spine it weighs 9.5 grains per inch and measures.300 in OD across. A 300 spine sits at the stiff end of the range, for heavy compound draws and heavier points.

Because the bore is.246 in, it takes the 6.5mm Microlite nock (8 gr) and the 6.5mm Hunter Classic insert (23 gr, 5/16 field points), and it threads to the 8-32. Those do not change with spine; only the GPI and outside diameter move across the table.

Spine is a starting point, not a guarantee: a 300 from one brand can differ from another. Read your exact draw weight and arrow length on the maker chart or bare-shaft test before cutting a dozen, and keep the finished arrow above the 5-grains-per-pound floor.

Spec, chart, nock and concept

Easton 6.5mm Hunter Classicthe full shaft spec (250, 300, 340, 400, 500)Easton 6.5mm Hunter Classic spine chartwhich spine for your draw weightWhat an arrow spine number meanshow to read the deflection numberThe nock that fits this borepress-fit nock for the.246 in shaftThe 5-grains-per-pound floorkeep the finished arrow heavy enoughGold Tip Hunter Pro (GTO)another Gold Tip shaft

Questions and answers

What is the model of the Easton 6.5mm Hunter Classic in a 300 spine?

Easton 6.5mm Hunter Classic

What is the brand of the Easton 6.5mm Hunter Classic in a 300 spine?

Easton

What is the spine of the Easton 6.5mm Hunter Classic in a 300 spine?

300

What is the outside diameter of the Easton 6.5mm Hunter Classic in a 300 spine?

.300 in OD