BoltFitFinder

The Gold Tip Hunter in a 300 spine: 9.3 grains per inch,.246 in bore, the Gold Tip GT nock (12.2 gr) it takes and the 8-32 thread. Suits a heavy draw of roughly 65 lb and up. Sourced.

Updated 05 September 2026.

Archery arrow models ยท specification

Gold Tip Hunter in a 300 spine: GPI, bore and nock

The 300 spine of the Gold Tip Hunter: its exact GPI, the nock and thread it takes, and the draw it suits.

The Gold Tip Hunter in a 300 spine weighs 9.3 grains per inch and suits a heavy draw of roughly 65 lb and up. It takes the Gold Tip GT nock (12.2 gr) its.246 in bore requires and the 8-32 point thread; confirm on the maker chart for your exact draw and length.
This spinemanufacturer data, cited
ModelGold Tip Hunter
BrandGold Tip
Spine300
Outside diameter.302 in OD
Weight9.3 GPI
Grains per inch9.3 GPI
Inside diameter.246 in
Stock nockGold Tip GT nock (12.2 gr)
Stock insertGold Tip Accu-Lite insert (12.1 gr)
Point thread8-32
Straightness+/-.006 in
Suitsa heavy draw of roughly 65 lb and up
The shaft

Gold Tip Hunter carbon arrow shaft (300 spine)

Shop Gold Tip Hunter carbon arrow shaft (300 spine) on AmazonaffiliateFind Gold Tip Hunter carbon arrow shaft (300 spine) on eBayaffiliate

Field notes

This is the 300 spine of the Gold Tip Hunter, a 6.5mm class (.246 in ID) shaft with a.246 in inside diameter. In this spine it weighs 9.3 grains per inch and measures.302 in OD across. A 300 spine sits at the stiff end of the range, for heavy compound draws and heavier points.

Because the bore is.246 in, it takes the Gold Tip GT nock (12.2 gr) and the Gold Tip Accu-Lite insert (12.1 gr), and it threads to the 8-32. Those do not change with spine; only the GPI and outside diameter move across the table.

Spine is a starting point, not a guarantee: a 300 from one brand can differ from another. Read your exact draw weight and arrow length on the maker chart or bare-shaft test before cutting a dozen, and keep the finished arrow above the 5-grains-per-pound floor.

Spec, chart, nock and concept

Gold Tip Hunterthe full shaft spec (300, 340, 400, 500)Gold Tip Hunter spine chartwhich spine for your draw weightWhat an arrow spine number meanshow to read the deflection numberThe nock that fits this borepress-fit nock for the.246 in shaftThe 5-grains-per-pound floorkeep the finished arrow heavy enoughCarbon Express D-Stroyeranother Carbon Express shaft

Questions and answers

What is the model of the Gold Tip Hunter in a 300 spine?

Gold Tip Hunter

What is the brand of the Gold Tip Hunter in a 300 spine?

Gold Tip

What is the spine of the Gold Tip Hunter in a 300 spine?

300

What is the outside diameter of the Gold Tip Hunter in a 300 spine?

.302 in OD