BoltFitFinder

The Gold Tip Kinetic Pierce Platinum in a 500 spine: 6.6 grains per inch,.166 in bore, the Gold Tip GTO nock (5.3 gr) it takes and the 8-32 thread. Suits a lighter draw of roughly 25 to 45 lb. Sourced.

Updated 05 September 2026.

Archery arrow models ยท specification

Gold Tip Kinetic Pierce Platinum in a 500 spine: GPI, bore and nock

The 500 spine of the Gold Tip Kinetic Pierce Platinum: its exact GPI, the nock and thread it takes, and the draw it suits.

The Gold Tip Kinetic Pierce Platinum in a 500 spine weighs 6.6 grains per inch and suits a lighter draw of roughly 25 to 45 lb. It takes the Gold Tip GTO nock (5.3 gr) its.166 in bore requires and the 8-32 point thread; confirm on the maker chart for your exact draw and length.
This spinemanufacturer data, cited
ModelGold Tip Kinetic Pierce Platinum
BrandGold Tip
Spine500
Outside diameter.222 in OD
Weight6.6 GPI
Grains per inch6.6 GPI
Inside diameter.166 in
Stock nockGold Tip GTO nock (5.3 gr)
Stock insertGold Tip ballistic insert system (43.5 gr)
Point thread8-32
Straightness+/-.0025 in
Suitsa lighter draw of roughly 25 to 45 lb
The shaft

Gold Tip Kinetic Pierce Platinum carbon arrow shaft (500 spine)

Shop Gold Tip Kinetic Pierce Platinum carbon arrow shaft (500 spine) on AmazonaffiliateFind Gold Tip Kinetic Pierce Platinum carbon arrow shaft (500 spine) on eBayaffiliate

Field notes

This is the 500 spine of the Gold Tip Kinetic Pierce Platinum, a micro (.166 in ID) shaft with a.166 in inside diameter. In this spine it weighs 6.6 grains per inch and measures.222 in OD across. A 500 spine sits at the light band, for lower draw weights and youth-to-adult setups.

Because the bore is.166 in, it takes the Gold Tip GTO nock (5.3 gr) and the Gold Tip ballistic insert system (43.5 gr), and it threads to the 8-32. Those do not change with spine; only the GPI and outside diameter move across the table.

Spine is a starting point, not a guarantee: a 500 from one brand can differ from another. Read your exact draw weight and arrow length on the maker chart or bare-shaft test before cutting a dozen, and keep the finished arrow above the 5-grains-per-pound floor.

Spec, chart, nock and concept

Gold Tip Kinetic Pierce Platinumthe full shaft spec (250, 300, 340, 400, 500)Gold Tip Kinetic Pierce Platinum spine chartwhich spine for your draw weightWhat an arrow spine number meanshow to read the deflection numberThe nock that fits this borepress-fit nock for the.166 in shaftThe 5-grains-per-pound floorkeep the finished arrow heavy enoughEaston 6.5mm Match Gradeanother Easton shaft

Questions and answers

What is the model of the Gold Tip Kinetic Pierce Platinum in a 500 spine?

Gold Tip Kinetic Pierce Platinum

What is the brand of the Gold Tip Kinetic Pierce Platinum in a 500 spine?

Gold Tip

What is the spine of the Gold Tip Kinetic Pierce Platinum in a 500 spine?

500

What is the outside diameter of the Gold Tip Kinetic Pierce Platinum in a 500 spine?

.222 in OD