Spine 700 Easton 5MM Axis vs Spine 400 Easton 5MM FMJ: specs compared
Updated 05 September 2026.
10.2 GPI
Spine 400 Easton 5MM FMJ wins on grains per inch
On grains per inch, Spine 400 Easton 5MM FMJ leads: 10.2 GPI versus 6.1 GPI.
| Spec | Spine 700 Easton 5MM Axis | Spine 400 Easton 5MM FMJ |
|---|---|---|
| Model | Easton 5mm Axis | Easton 5mm FMJ |
| Brand | Easton | Easton |
| Spine | 700 | 400 |
| Weight | 6.1 GPI | 10.2 GPI |
| Grains per inch | 6.1 GPI | 10.2 GPI |
| Inside diameter | .204 in | .204 in |
| Stock nock | Easton X nock (9 gr) | 5mm X nock (9 gr) |
| Stock insert | Easton ST Axis HIT insert (16 gr) | 5mm HIT insert (16 gr) |
| Point thread | 8-32 | 8-32 |
| Straightness | +/-.003 in | +/-.001 in |
| Suits | a very light or youth draw under about 30 lb | a medium draw of roughly 45 to 65 lb |
| Outside diameter | .263 in OD |
Questions and answers
Which has the higher grains per inch, Spine 700 Easton 5MM Axis or Spine 400 Easton 5MM FMJ?
On grains per inch, Spine 400 Easton 5MM FMJ leads: 10.2 GPI versus 6.1 GPI.
How do Spine 700 Easton 5MM Axis and Spine 400 Easton 5MM FMJ compare?
On grains per inch, Spine 400 Easton 5MM FMJ leads: 10.2 GPI versus 6.1 GPI.