Easton HIT insert vs The 8-32 point thread: specs compared
Updated 05 September 2026.
4
specs differ
Easton HIT insert and The 8-32 point thread differ on 4 specs: thread standard, fits, fitment rule, note.
| Spec | Easton HIT insert | The 8-32 point thread |
|---|---|---|
| Thread standard | 8-32 (through the insert) | 8-32 (industry standard) |
| Fits | Easton 5mm and micro shafts (Axis, FMJ); the insert sits fully inside the shaft | Every standard field point, broadhead and insert except Easton Deep Six |
| Fitment rule | The HIT insert glues fully inside the shaft so no collar sits proud of the shaft wall, giving the small-diameter shaft a strong, low-drag front end. It carries a standard 8-32 thread, so standard points and broadheads fit. | The 8-32 thread is the archery industry standard. Standard 8-32 broadheads fit 5mm, 6mm and 6.5mm shafts through an 8-32 insert. A field point with an 8-32 thread screws into any 8-32 insert regardless of brand. |
| Note | The 5mm Axis ships with a 16-grain ST Axis HIT insert; the insert weight is part of the arrow's front-of-centre, so swapping it changes tune. | The visible point diameter (ferrule) varies, 9/32, 5/16 or 11/32 inch, to match the shaft outside diameter, but the internal thread stays 8-32. |
Questions and answers
How do Easton HIT insert and The 8-32 point thread compare?
Easton HIT insert and The 8-32 point thread differ on 4 specs: thread standard, fits, fitment rule, note.