Gold Tip Force F.O.C. (6.5mm class (.246 in ID)): published spine and grains-per-inch table, the Gold Tip Accu-Lite nock (8.3 gr) it takes, its insert and the 8-32 point thread. Spines 250, 300, 340, 400.
Updated 05 September 2026.
Gold Tip Force F.O.C.: spine, diameter and nock fitment
The published spine and GPI table for the Gold Tip Force F.O.C., the nock and insert it takes, and the point thread.
| Class | 6.5mm class (.246 in ID) |
|---|---|
| Inside diameter | .246 in |
| Straightness | +/-.001 in |
| Stock nock | Gold Tip Accu-Lite nock (8.3 gr) |
| Stock insert | Gold Tip.246 brass insert (100 gr), plus Accu-Lite insert (12.1 gr) |
| Point thread | 8-32 |
| Spine 250 | 9.8 GPI,.304 in OD |
| Spine 300 | 8.8 GPI,.299 in OD |
| Spine 340 | 8.2 GPI,.296 in OD |
| Spine 400 | 7.4 GPI,.291 in OD |
Gold Tip Force F.O.C. carbon arrow shaft
Shop Gold Tip Force F.O.C. carbon arrow shaft on AmazonaffiliateFind Gold Tip Force F.O.C. carbon arrow shaft on eBayaffiliateField notes
The Gold Tip Force F.O.C. is a 6.5mm-class shaft with a.246-inch inside diameter built for high front-of-centre, shipping with a 100-grain brass insert as well as the standard Accu-Lite insert.
Its published spines run from a stiff 250 at 9.8 grains per inch to a 400 at 7.4 grains per inch, sorted to a tight +/-.001-inch straightness.
The.246-inch bore uses the standard 8-32 point thread; the heavy brass insert is what drives the extreme forward-of-centre this shaft is built for.
Nock, thread, chart and more
Questions and answers
What is the class of the Gold Tip Force F.O.C.?
6.5mm class (.246 in ID)
What is the inside diameter of the Gold Tip Force F.O.C.?
.246 in
What is the straightness of the Gold Tip Force F.O.C.?
+/-.001 in
What is the stock nock of the Gold Tip Force F.O.C.?
Gold Tip Accu-Lite nock (8.3 gr)