Victory VAP TKO Elite V1 (micro (.166 in ID)): published spine and grains-per-inch table, the AAE IP nock #4 (.166 in) it takes, its insert and the 8-32 point thread. Spines 300, 350, 400.
Updated 05 September 2026.
Victory VAP TKO Elite V1: spine, diameter and nock fitment
The published spine and GPI table for the Victory VAP TKO Elite V1, the nock and insert it takes, and the point thread.
| Class | micro (.166 in ID) |
|---|---|
| Inside diameter | .166 in |
| Straightness | +/-.001 in |
| Stock nock | AAE IP nock #4 (.166 in) |
| Stock insert | Victory VAP Shok taper-lock aluminium insert |
| Point thread | 8-32 |
| Spine 300 | 9.5 GPI,.242 in OD |
| Spine 350 | 8.7 GPI,.236 in OD |
| Spine 400 | 7.9 GPI,.231 in OD |
Victory VAP TKO Elite V1 carbon arrow shaft
Shop Victory VAP TKO Elite V1 carbon arrow shaft on AmazonaffiliateFind Victory VAP TKO Elite V1 carbon arrow shaft on eBayaffiliateField notes
The Victory VAP TKO Elite V1 is a micro-diameter hunting shaft with a.166-inch inside diameter, so it takes a small G or F class pin-style nock (AAE IP #4), not a.204 X nock.
Its published hunting spines run from a stiff 300 at 9.5 grains per inch to a 400 at 7.9 grains per inch, sorted to a tight +/-.001-inch straightness with the ICE coating.
The micro.166 bore uses a Shok taper-lock aluminium insert carrying the standard 8-32 point thread, which also drives the high front-of-centre these small shafts are known for.
Nock, thread, chart and more
Questions and answers
What is the class of the Victory VAP TKO Elite V1?
micro (.166 in ID)
What is the inside diameter of the Victory VAP TKO Elite V1?
.166 in
What is the straightness of the Victory VAP TKO Elite V1?
+/-.001 in
What is the stock nock of the Victory VAP TKO Elite V1?
AAE IP nock #4 (.166 in)