Victory VForce 245 Elite V1 (standard (.245 in ID)): published spine and grains-per-inch table, the AAE IP6 nock (.245 in) it takes, its insert and the 8-32 point thread. Spines 300, 350, 400, 500, 600.
Updated 05 September 2026.
Victory VForce 245 Elite V1: spine, diameter and nock fitment
The published spine and GPI table for the Victory VForce 245 Elite V1, the nock and insert it takes, and the point thread.
| Class | standard (.245 in ID) |
|---|---|
| Inside diameter | .245 in |
| Straightness | +/-.001 in |
| Stock nock | AAE IP6 nock (.245 in) |
| Stock insert | Victory aluminium insert |
| Point thread | 8-32 |
| Spine 300 | 9.9 GPI |
| Spine 350 | 8.7 GPI |
| Spine 400 | 8.2 GPI |
| Spine 500 | 6.9 GPI |
| Spine 600 | 6.7 GPI |
Victory VForce 245 Elite V1 carbon arrow shaft
Shop Victory VForce 245 Elite V1 carbon arrow shaft on AmazonaffiliateFind Victory VForce 245 Elite V1 carbon arrow shaft on eBayaffiliateField notes
The Victory VForce 245 Elite V1 is a standard-diameter carbon shaft with a.245-inch inside diameter, so it takes an S-class AAE IP6 nock, not a micro G or X nock.
Its published spines run from a stiff 300 at 9.9 grains per inch to a 600 at 6.7 grains per inch, sorted to a tight +/-.001-inch straightness with the ICE nano-ceramic coating.
The.245-inch bore uses the standard 8-32 point thread through an aluminium insert, so standard field points and broadheads fit.
Nock, thread, chart and more
Questions and answers
What is the class of the Victory VForce 245 Elite V1?
standard (.245 in ID)
What is the inside diameter of the Victory VForce 245 Elite V1?
.245 in
What is the straightness of the Victory VForce 245 Elite V1?
+/-.001 in
What is the stock nock of the Victory VForce 245 Elite V1?
AAE IP6 nock (.245 in)