BoltFitFinder

The Gold Tip Force F.O.C. in a 250 spine: 9.8 grains per inch,.246 in bore, the Gold Tip Accu-Lite nock (8.3 gr) it takes and the 8-32 thread. Suits a heavy draw of roughly 65 lb and up. Sourced.

Updated 05 September 2026.

Archery arrow models ยท specification

Gold Tip Force F.O.C. in a 250 spine: GPI, bore and nock

The 250 spine of the Gold Tip Force F.O.C.: its exact GPI, the nock and thread it takes, and the draw it suits.

The Gold Tip Force F.O.C. in a 250 spine weighs 9.8 grains per inch and suits a heavy draw of roughly 65 lb and up. It takes the Gold Tip Accu-Lite nock (8.3 gr) its.246 in bore requires and the 8-32 point thread; confirm on the maker chart for your exact draw and length.
This spinemanufacturer data, cited
ModelGold Tip Force F.O.C.
BrandGold Tip
Spine250
Outside diameter.304 in OD
Weight9.8 GPI
Grains per inch9.8 GPI
Inside diameter.246 in
Stock nockGold Tip Accu-Lite nock (8.3 gr)
Stock insertGold Tip.246 brass insert (100 gr), plus Accu-Lite insert (12.1 gr)
Point thread8-32
Straightness+/-.001 in
Suitsa heavy draw of roughly 65 lb and up
The shaft

Gold Tip Force F.O.C. carbon arrow shaft (250 spine)

Shop Gold Tip Force F.O.C. carbon arrow shaft (250 spine) on AmazonaffiliateFind Gold Tip Force F.O.C. carbon arrow shaft (250 spine) on eBayaffiliate

Field notes

This is the 250 spine of the Gold Tip Force F.O.C., a 6.5mm class (.246 in ID) shaft with a.246 in inside diameter. In this spine it weighs 9.8 grains per inch and measures.304 in OD across. A 250 spine sits at the stiff end of the range, for heavy compound draws and heavier points.

Because the bore is.246 in, it takes the Gold Tip Accu-Lite nock (8.3 gr) and the Gold Tip.246 brass insert (100 gr), plus Accu-Lite insert (12.1 gr), and it threads to the 8-32. Those do not change with spine; only the GPI and outside diameter move across the table.

Spine is a starting point, not a guarantee: a 250 from one brand can differ from another. Read your exact draw weight and arrow length on the maker chart or bare-shaft test before cutting a dozen, and keep the finished arrow above the 5-grains-per-pound floor.

Spec, chart, nock and concept

Gold Tip Force F.O.C.the full shaft spec (250, 300, 340, 400)Gold Tip Force F.O.C. spine chartwhich spine for your draw weightWhat an arrow spine number meanshow to read the deflection numberThe nock that fits this borepress-fit nock for the.246 in shaftThe 5-grains-per-pound floorkeep the finished arrow heavy enoughGold Tip Velocityanother Gold Tip shaft

Questions and answers

What is the model of the Gold Tip Force F.O.C. in a 250 spine?

Gold Tip Force F.O.C.

What is the brand of the Gold Tip Force F.O.C. in a 250 spine?

Gold Tip

What is the spine of the Gold Tip Force F.O.C. in a 250 spine?

250

What is the outside diameter of the Gold Tip Force F.O.C. in a 250 spine?

.304 in OD