Easton 5mm Axis spine chart: which spine for your draw
Which Easton 5mm Axis spine to choose for your draw weight and point, from its published range.
Dry-fire warning
Crossbow bolt data and archery arrow spine, nock and thread data are quoted from each manufacturer's published figures, owner documentation and industry standards, cited on every page. A nock, spine or grain-weight mismatch can cause a dry-fire that damages the bow and can injure the shooter. Confirm against your own owner's manual and the arrow maker's own chart before shooting, and never drop below the stated minimum total weight.
| Available spines | 260, 300, 340, 400, 500, 600, 700 |
|---|---|
| Light setup (about 40-50 lb) | 500 spine, the weakest offered that suits a lighter draw |
| Medium setup (about 55-65 lb) | 340 spine, the mid choice with a 100 grain point |
| Heavy setup (about 65-75 lb) | 300 spine, the stiffest choice for a heavy draw or point |
| Point-weight adjustment | Move one spine group stiffer per 25 grains of point weight over 100 grains |
Easton 5mm Axis carbon arrow shaft
Search Amazon for Easton 5mm Axis carbon arrow shaftaffiliate searchFind Easton 5mm Axis carbon arrow shaft on eBayaffiliateField notes
The Easton 5mm Axis is offered in 260, 300, 340, 400, 500, 600, 700 spine. Spine tracks draw weight: a lighter bow flexes the shaft less and wants a weaker (higher-number) spine, a heavier bow wants a stiffer (lower-number) one.
These bands follow the widely published spine ranges, roughly 500 to 600 for a 25 to 45 pound draw, 340 to 400 for 45 to 65 pounds, and 250 to 300 for 65 pounds and up, then adjusted for arrow length and point weight.
Treat this as the starting point the way an archery shop does, then confirm your exact draw weight and arrow length on the manufacturer chart or with a bare-shaft test before cutting a dozen.
Spec, concept and worked setups
Sources: Easton 5mm Axis arrow shaft spec (Lancaster Archery listing) · Easton 5mm Axis arrow (Easton Archery product page) · Nock On Archery - Arrow Spine Chart: choosing the correct spine