The right bolt for the Ravin R10
The correct bolt length, nock and minimum grain weight for the Ravin R10, and what stops a dry-fire.
Dry-fire warning
Bolt length, nock type and minimum grain weight are quoted from each manufacturer's published arrow data and owner documentation, cited on every page. A nock or grain-weight mismatch can cause a dry-fire that damages the bow and can injure the shooter. Confirm against your own owner's manual before shooting, and never drop below the stated minimum total grain weight.
| Bolt length | 20 in |
|---|---|
| Required nock | Ravin polymer clip-on nock |
| Factory arrow | Ravin.003, 400 gr total, brass insert, 2 in offset vanes |
| Compatibility | Standard Ravin.003 arrow (all Ravin except R500) |
| Minimum total grain | 400 gr total (300 gr shaft + 100 gr point) |
Ravin.003 20 in arrow with Ravin polymer clip-on nock
Search Amazon for Ravin.003 20 in arrow with Ravin polymer clip-on nockaffiliate searchField notes
The R10 is a compact HeliCoil Ravin at 400 fps that cocks on just 12 pounds of draw. It is not an R500, so it takes the standard 20-inch Ravin.003 arrow with the Ravin clip-on nock.
A half-moon or flat nock will not clip Ravin's string and is a derailment risk on the steep-angle cams. Use Ravin.003 arrows only, and never the R500 arrow.
Related crossbows and the nock
Sources: Ravin -.003 crossbow arrows (fits all except R500) · Ravin - crossbow models index