Does the Barnett Headhunter arrow fit the Barnett Whitetail Hunter II? Both use the half-moon (moon) nock; arrow 20 in (22 in option), bolt length 20 in, minimum 400 gr total with a 100 gr point (22 in Barnett-recommended). Sourced fitment.
Updated 05 September 2026.
Does the Barnett Headhunter arrow fit the Barnett Whitetail Hunter II?
Whether the Barnett Headhunter arrow fits the Barnett Whitetail Hunter II, by shared nock, length and the weight floor.
| Arrow | Barnett Headhunter arrow |
|---|---|
| Crossbow | Barnett Whitetail Hunter II |
| Shared nock | half-moon (moon) nock |
| Arrow length | 20 in (22 in option) |
| Arrow weight | about 400 gr with a 100 gr point |
| Bolt length the bow is cut for | 20 in |
| Bow minimum total weight | 400 gr total with a 100 gr point (22 in Barnett-recommended) |
Barnett Headhunter arrow crossbow arrow
Shop Barnett Headhunter arrow crossbow arrow on AmazonaffiliateFind Barnett Headhunter arrow crossbow arrow on eBayaffiliateField notes
The Barnett Whitetail Hunter II is built around the half-moon (moon) nock and a 20 in bolt, and its stated minimum is 400 gr total with a 100 gr point (22 in Barnett-recommended). The Barnett Headhunter arrow carries the same half-moon (moon) nock, which is the first thing that has to match.
Its 20 in (22 in option) matches that bolt length, so it loads and shoots as the bow expects.
This is the classic manual dry-fire cause. A half-moon nock loaded a quarter-turn off lets the string ride over one wall of the groove. Always seat the index vane where the manual shows.
Arrow, crossbow and the rules
Questions and answers
Does the Barnett Headhunter arrow fit the Barnett Whitetail Hunter II?
Yes. The Barnett Headhunter arrow shares the half-moon (moon) nock the Barnett Whitetail Hunter II requires, and its 20 in (22 in option) matches the 20 in bolt length.