BoltFitFinder
Arrow spine by setup · bolt datasheet

What arrow spine for 45 lb draw at a 29 inch arrow

The starting spine for a 45 lb draw at a 29 inch arrow with a 100 grain point, and the weight floor.

Dry-fire warning

Crossbow bolt data and archery arrow spine, nock and thread data are quoted from each manufacturer's published figures, owner documentation and industry standards, cited on every page. A nock, spine or grain-weight mismatch can cause a dry-fire that damages the bow and can injure the shooter. Confirm against your own owner's manual and the arrow maker's own chart before shooting, and never drop below the stated minimum total weight.

For a 45 lb draw at a 29 inch arrow with a 100 grain point, start with a 500 spine (the 500-600 band), and keep the finished arrow at or above 225 grains total.
This setupmanufacturer data, cited
Draw weight45 lb
Arrow length29 in (cut, nock groove to shaft end)
Point weight100 gr
Recommended spine500 (published band 500-600)
Minimum total weight225 gr, from the 5-grains-per-pound floor
A shaft in this spine

Field notes

A 45 lb draw at a longer 29 inch arrow needs a touch more stiffness than the 27 inch setup, holding it at 500 rather than dropping to 600. Length pulls it up within the light band.

Spine is a starting point, not a guarantee, because a 340 from one brand can differ from another. Confirm on your arrow maker's chart at 29 inches and 45 pounds, or bare-shaft test before cutting a dozen.

Whatever spine you land on, keep the finished arrow at or above 225 grains total, the 5-grains-per-pound floor, so the bow is not shooting dangerously light.

The rules behind this pick

Sources: 3Rivers Archery - How to find the right spine (spine selection charts) · Nock On Archery - Arrow Spine Chart: choosing the correct spine