BoltFitFinder
Arrow spine by setup · bolt datasheet

What arrow spine for 60 lb draw at a 28 inch arrow

The starting spine for a 60 lb draw at a 28 inch arrow with a 100 grain point, and the weight floor.

Dry-fire warning

Crossbow bolt data and archery arrow spine, nock and thread data are quoted from each manufacturer's published figures, owner documentation and industry standards, cited on every page. A nock, spine or grain-weight mismatch can cause a dry-fire that damages the bow and can injure the shooter. Confirm against your own owner's manual and the arrow maker's own chart before shooting, and never drop below the stated minimum total weight.

For a 60 lb draw at a 28 inch arrow with a 100 grain point, start with a 400 spine (the 340-400 band), and keep the finished arrow at or above 300 grains total.
This setupmanufacturer data, cited
Draw weight60 lb
Arrow length28 in (cut, nock groove to shaft end)
Point weight100 gr
Recommended spine400 (published band 340-400)
Minimum total weight300 gr, from the 5-grains-per-pound floor
A shaft in this spine

Field notes

A 60 lb bow with a 28 inch arrow and a 100 grain point falls in the 340 to 400 band; the moderate draw and short cut place it at 400. A heavier point or longer arrow moves it toward 340.

Spine is a starting point, not a guarantee, because a 340 from one brand can differ from another. Confirm on your arrow maker's chart at 28 inches and 60 pounds, or bare-shaft test before cutting a dozen.

Whatever spine you land on, keep the finished arrow at or above 300 grains total, the 5-grains-per-pound floor, so the bow is not shooting dangerously light.

The rules behind this pick

Sources: Nock On Archery - Arrow Spine Chart: choosing the correct spine · Sportsman's Warehouse - Arrow Spine Charts: Compound, Recurve and Traditional