The right bolt for the Barnett Hyper Whitetail 410
The correct bolt length, nock and minimum grain weight for the Barnett Hyper Whitetail 410, and what stops a dry-fire.
Dry-fire warning
Crossbow bolt data and archery arrow spine, nock and thread data are quoted from each manufacturer's published figures, owner documentation and industry standards, cited on every page. A nock, spine or grain-weight mismatch can cause a dry-fire that damages the bow and can injure the shooter. Confirm against your own owner's manual and the arrow maker's own chart before shooting, and never drop below the stated minimum total weight.
| Bolt length | 22 in |
|---|---|
| Required nock | HyperFlite capture nock |
| Factory arrow | HyperFlite,.204 in ID, 9.8 GPI, +/-.001 straightness, Bohning vanes |
| Compatibility | Hyper-series only (barrel cut for.204 shaft) |
| Minimum total grain | 400 gr total with a 100 gr point |
Barnett HyperFlite 22 in.204 small-diameter arrow with capture nock
Search Amazon for Barnett HyperFlite 22 in.204 small-diameter arrow with capture nockaffiliate searchFind Barnett HyperFlite 22 in.204 small-diameter arrow with capture nock on eBayaffiliateField notes
The Hyper Whitetail 410 was Barnett's first Hyper-powered whitetail bow, firing the 22-inch small-diameter HyperFlite arrow to 410 fps with 142 foot-pounds. It uses the HyperFlite capture nock.
This is a Hyper bow, so a standard 20-inch Barnett half-moon arrow will not fit the barrel. Only HyperFlite arrows with the capture nock are correct.
Related crossbows and the nock
Sources: Barnett Hyper Whitetail 410, 410 fps, HyperFlite arrows (Barnett) · Barnett - HyperFlite 22 inch arrow (5-pack) spec · Barnett HyperFlite small-diameter arrow overview (Archery Business)